Dynamic balancing solutions for textile machinery, agricultural machinery and grinding wheels

1.Textile spindle wing/spinning cup/double twist

Textile spindles, spinning cups and double-twist spindles are slender shaft components with rotational speeds ranging from 8000 to 25000 r/min, and are particularly sensitive to couple imbalance.It is recommended to use a dedicated slender shaft model and be equipped with strict process records.

2.Winding head/hot roller

The rotational speed of the textile winding head and the hot roller is 1500-6000 r/min. The main problem is the imbalance after thermal deformation.It is recommended to perform thermal equilibrium at the operating temperature.

3.Wire separator roller/guide roller/sword rod

Textile transmission components such as spinning rollers, guide rollers, and sword rods have a working speed of 1000-3000 r/min. It is recommended to use G6.Level 3 is sufficient.

4.Agricultural machinery cutter knife roller

The rotational speed of the cutter roller of agricultural machinery cutters (including harvesters and straw choppers) is 1500-3000 r/min. The quality of dynamic balance directly affects the tool life and vibration noise.

5.Agricultural machinery screw shaft

The screw shaft belongs to the category of screw conveyors, with a working speed of 100-500 r/min and a large moment of inertia. It is recommended to use horizontal double-sided models.

6.Agricultural machinery stepless speed change wheels

Agricultural continuously variable transmission wheels are components with variable transmission ratios. It is recommended to perform balancing in the assembled state and file the data by batch.

7.Grinding wheel/grinding wheel

Grinding wheels are ultra-high-speed rotating parts (some ceramic/resin grinding wheels exceed 30,000 r/min) and are extremely sensitive to imbalance.It is recommended to perform static balancing before use and dynamic balancing regularly during use.

8.Centerless grinding wheel

Centerless grinding wheels are high-precision grinding parts, with a working speed of 1500-3500 r/min.It is recommended to file the balanced data piece by piece and rebalance it regularly.