Home appliances & IT dynamic balancing solution

1.Indoor unit cross-flow fan blade of air conditioner

It is common for the cross-flow fan blades of indoor air conditioners to have a large aspect ratio and uneven injection molding density. The mainstream process is vertical single-sided balance + automatic glue addition correction, with a cycle time of 8-12 seconds per piece.Fuman Machinery Serial rotor balancing machineCoverage with vertical models.

2.Axial flow fan blades for outdoor air conditioners

The rotational speed of the axial flow fan blades of the outdoor unit of the air conditioner is 800-1200 r/min. The main problems are uneven casting of the blades and eccentricity during installation.G6.3 can meet the requirements of noise and lifespan.

3.Variable frequency/fixed frequency air conditioning compressor motor

The motor speed of the inverter air conditioner compressor is 3000-9000 r/min, with a large batch size and a tight rhythm.Fuman Machinery fully automatic balancing machine supports +MES upload.

4.Washing machine DD direct drive motor

The DD (direct drive) motor of the washing machine has a rotational speed of 600-1400 r/min, without a gearbox, and has a high requirement for stability.Fuman Machinery Brushless motor rotor balancing machineIt can cover.

5.Series-excited motor for washing machine

The series-excited motor of the washing machine belongs to the structure with commutator winding. The series-excited dedicated model takes into account the winding distribution compensation and is more accurate than the general model.

6.Range hood/purifier fan

The fan of a range hood is a key component in an oily fume environment. The impeller is prone to oil accumulation, which can cause imbalance. Commonly used models include vertical single-sided balance and automatic gluing.The same process applies to the fan of the purifier.

7.Sweeping robot/floor scrubber fan

The fan speed of the sweeping robot and the floor scrubber ranges from 5,000 to 30,000 r/min, and they are high-speed brushless motors.Fuman Machinery Brushless motor rotor balancing machineCovering over 30,000 r/min segments.

8.High-speed motor for hair dryer

The high-speed motor of the hair dryer is 100,000 + r/min, which belongs to the high-speed brushless motor and is extremely sensitive to assembly eccentricity.Fuman Machinery Laser machine balancing Machine & Precise unbalance correction can be performed in the sensitive area at the end of the winding.

9.PCB spindle (IT Manufacturing)

PCB drilling machines and spindle machines have a rotational speed of 30,000 to 80,000 r/min and are classified as precision grinding machines.It is recommended to use soft-supported precision models and perform balancing in a constant temperature environment.

10.Refrigerator compressor motor

The motor speed of the refrigerator compressor is 1500-3600 r/min, with an extremely large mass production scale and a cycle time of 6-10 seconds per piece.The Fuman Mechanical fully automatic balancing machine supports 100% full inspection and MES upload.

11.Air fryer/food processor/juicer motor

The motor speed of the air fryer, food processor and juicer is 10,000-20,000 r/min. It is small in size and has a relatively large initial eccentricity.It is recommended to perform rotor rough balancing before assembly and then proceed with the final assembly.

12.Electric fan/heater/humidifier motor

The motor speed of the household electric fan, heater and humidifier is 500-1500 r/min, which belongs to the category of general small motors, G6.3 can meet the requirements.